How to Choose the Right Beiter Plunger for a Recurve
The beiter plunger is a very important tool for an archer, and if you want to be the most effective hunter possible it would be in your best interest to invest in one. The plunger is a piece of equipment that many archers don’t think they need until they find it’s difficult to use their bow without one.
A beiter plunger can help improve accuracy, consistency, and even power by minimizing vibration as well as reducing fatigue on your bow arm. Many hunters swear by beiter plunger for this reason, and if you are serious about becoming the best archer you can be it would be well worth your time to try one out!
The beiter archery plunger actually works in a very simple way. The rubber tip will rest against your bow string when at full draw (this is called “nocking” your beiter plunger), and the “shaft” will be placed against your bow arm. When you release an arrow, it is important that all of the pressure goes directly into propelling your arrow forward instead of affecting other parts of the bow – this way you get maximum accuracy!
The Beiter Plunger, developed 1985 to 1986, was introduced at the Las Vegas Shoot 1987. Actually it is represented on archery fields world wide. Since 1992 all Olympic Medallists used Beiter Plungers as well as over 80% of all competing archers!
It can be hard to know how much power or accuracy will be improved by using a beiter plunger since every bow has different draw weights as well as different shooting styles. If you are looking for some help with finding the beiter plunger that is right for you, be sure to remember these helpful tips:
- A more expensive beiter plunger will not always be the best choice. It really depends on your specific archery needs and how much money you want to invest – sometimes a mid-range beiter plunger can achieve similar results at half of the price.
- Aluminum beiter plungers are lighter and therefore make it easier to hold your bow arm up for a long period of time without fatigue, but they will be less durable than a heavy duty beiter plunger made from steel or other metals. If you tend to hunt in rougher conditions with branches and bushes all around then an aluminum beiter plunger can be a good choice for you.
- A beiter plunger with an arrow shelf is not always the best option – sometimes it is better to have your beiter plunger resting directly against your bow string instead of having anything in between them, as this helps reduce any vibration or extra movement before you release! It is best to experiment with beiter plungers that have arrow shelves and beiter plungers without them before deciding which you prefer. You may be surprised by the results!
- A beiter plunger will help reduce vibration but it cannot completely eliminate all movement in your bow arm – especially if there is a lot of tension on your string or if you have a very powerful bow. If you are hunting for smaller prey that requires more precision be sure to practice with your beiter plunger from short distances before going out on a hunt!
- It is important to remember that although beiter plungers can help reduce fatigue and improve accuracy, they cannot do all of the work for you. You should be sure to practice frequently and be ready for some trial and error before going out on a hunt.
Why You Need a Bow Plunger
The plunger, also known as button, is a small cylinder that threads into your bow’s riser above the arrow rest. A plunger houses a spring, and the plunger’s tip contacts your arrow shaft. Plungers have two main functions: Setting your Center Shot and Flex Compensation.
Center shot
“Center shot” is an arrow’s lateral position on the bow. When setting up a bow, the archer or bow technician adjusts the plunger so it guides the arrow in line with the center of the bow. This setup requires using guides like a Beiter limb line gauge to find the bow’s centerline. The technician then aligns the arrow by loosening the plunger’s jam nut and spinning it until the arrow shaft aligns with the center of the bow.
Flex Compensation
Arrows flex upon release because the string must slip past your fingers and because of the difference in energy delivered to the front and back ends of the arrow. Although archers strive for consistent releases, they are still human, and there will be minor differences in each release, even for the most experienced shooter.
There will be slight differences in your draw, which determines how much energy you put into the arrow. There are also going to be small differences in how your fingers release the string. That spring, we mentioned earlier, is what will compensate for these differences.
By spinning the dial at the end opposite of the plunger tip, you can adjust the spring’s tension. This adjustment to the spring allows it to absorb more or less of that initial flex in the arrow to compensate for your release differences.
Plungers are a necessary piece of equipment for any archer looking to start into Olympic or barebow archery. They help to adjust the position of your arrow on the bow’s arrow rest. The spring inside also helps to absorb some flex in the arrow as it is released from the bow. Both of these functions in the plunger will help improve the accuracy of your shots!
What Does a Plunger Do On a Recurve Bow?
The plunger (or pressure button) on a recurve bow performs two main functions. By adjusting how far it protrudes out of the riser it controls the horizontal angular position of the arrow on the riser. It is generally accepted that, when looking down the length of an arrow on the bow. the tip of the arrow should be about a couple of millimetres outboard of the bow string.
Its next function is to adjust the effective dynamic stiffness of the arrow. There are various tuning techniques for setting up this parameter, which can be easily researched on line. But basically, if the arrow is moving laterally away from the bow when it is shot, then the plunger is too stiff, so the force of the spring within the plunger should be reduced. In an extreme case, it means that the arrow itself is just too stiff.
If the arrow almost seems to be trying to wrap itself round the riser when being shot then the plunger spring force is too low or the arrow is not stiff enough. If you have the wrong stiffness arrow for your bow then adjusting the plunger will not be able to correct it. The plunger does, however, provide a means of fine tuning the effective arrow dynamic stiffness. Getting it right can be worth a lot of points!
What is Anchor Sight?
An anchor sight is a device which helps the archer to be in full control when they are aiming at their target. It enables them to be more precise and accurate with every shot fired, regardless of whether it’s day or night. When you shoot the Anchor Sight, you will discover a whole new world of knowledge.
For the first time, you will be able to see what is really going on with your shot. You will see torque and learn how to control it. You will know when it was you that blew the shot and not wonder if it was one of the various other possibilities. You will see and react to every error you make. You will shoot for the pure enjoyment of it, because you have control and love that feeling.
Beiter Plunger Setup
How To Adjust Bow Sights?
You should be able to adjust your bow sight in three easy steps.
First, you need to make sure the plunger is pointing directly down when at full draw and level with the ground. This will be achieved by loosening the jam-nut that secures it in place. If this part isn’t done correctly then everything else that follows will be a complete waste of time.
Second, you should be able to adjust the plunger by turning it until your sight pin is centered on the target bullseye and then locked back in place. If for example you have an arrow rest which has a circular grove cut into it to accommodate this part, make sure that before you lock it back in place that
there is a small gap between the plunger and bow riser. This will be done by loosening the jam-nut again which secures it to the bow riser.
Third, you need to adjust your sight pin(s) for elevation and windage so that they are both set directly on top of the plunger. If you have a beiter limb line gauge make sure that your bow is lined up with it and then take note of how many grooves deep or high each number on your sight pin(s) are set at. To adjust them, simply rotate the windage or elevation screw using an Allen key until both numbers match one of the grooves on your beiter limb line gauge. If you don’t have a beiter limb line gauge, then simply count how many rotations it takes to rotate either windage or elevation screw until both numbers match up with the plunger.
Bow & Arrow Plungers are typically held in place by one of two methods: a beiter plunger bracket or limb bolts. Some bows have one of these, some both and for the very rare bow that has neither then it will be held in place by tape.
Recommendation: We recommend using a Beiter Plunger when setting up your new bow sight because they are integrated into every beiter sight which makes them the logical choice.
Best Recurve Sight In 2021
DarkForest BS001 Full Metal Simplified Bow Sight
Losing a pin for ftp sights means losing your chance at taking accurate shots, so this product eliminates all of those problems! The metal construction assures durability so you get quality products every time. It’s also easy to install and isn’t sensitive to changes in humidity levels or conditions outside. You’ll have great flexibility when shooting- take more precise 1″ aiming points if you’re just doing light hunting
SHARROW Recurve Bow Sight
The SHARROW Recurve Bow Sight is an excellent choice for those who want a simple, durable and accurate bow sight. It’s made of aluminum alloy so you know it will be able to be used in any conditions without worrying about breaking or losing pins. Plus there are no complicated mechanisms to deal with.
This product comes standard with fiber optic pins that are easy to see and use. It also fits beiter plunger bows perfectly, making it an excellent choice for those who want a bow sight but don’t want to deal with complicated processes or parts!
The SHARROW Recurve Bow Sight is designed for ease of installation and removal so you can keep your other hunting gear as ready to be packed up quickly as possible.
Huntingdoor Archery Recurve Bow Sight
The Huntingdoor Archery Recurve Bow Sight is a great choice for those looking to be able to adjust their pins easily and quickly. It’s made from aluminum alloy, has adjustable windage and elevation, fits beiter plunger bows perfectly, and includes fiber optic pins that are easy to see when in the field. This product also provides an accurate and durable sight that can be used for hunting or target shooting.
The Huntingdoor Archery Recurve Bow Sight is designed with ease of installation in mind, making it simple to take on and off whenever you need to make adjustments! It’s also adjustable enough so you can use this product comfortably when taking longer shots at your targets.
TOPOINT ARCHERY 3 Pin Bow Sight
The TOPOINT ARCHERY 3 Pin Bow Sight is designed for competitive shooting, hunting, and rugged general use. The sight has factory aligned pins with pre-centered cross hairs that are fast to get on target in all conditions.
It also features 4 stop screws (comes with two) for quick pin adjustments without tools. The precision machined brass housing will stand up to heavy abuse in any weather condition while delivering years of reliable service in your tree stands or ground blinds.
Trophy Ridge Volt 5 Pin Bow Sight
The Volt 5 Pin Bow Sight features a unique design that provides two square-shaped pins simultaneously on each side of the screen. Only three inches tall, the Volt is compact and lightweight for easy storage or transporting to a tournament sight-in site. It is designed with a dielectric lens so it can withstand high voltage environments and is resistant to moisture as well as fogging from heavy shooting conditions.
